Garage Epoxy Floor Coating Cost

An Oklahoma City Garage Door Pros  is made by combining an epoxy resin and an amine hardener. When these two chemical components are mixed together they create flooring surface that is hard, extremely durable and has a glossy finish. Epoxy floor coating is often used to surface concrete floors in large commercial warehouses and car parks but it can also just as easily be used to protect and enhance other cement, wood, or metal floors. In many instances, paint chips and/or other loose materials can be added to the epoxy as it’s curing in order to give the final coat a granite texture. Sand and other sediments are sometimes also added to improve the epoxy floor’s traction.

The 3 Kinds of Epoxy Floor Coating

100% solid epoxy coatings

This is the most expensive type of epoxy floor coating, and it is the kind you’ll find being used on commercial floors. Within the class of 100% solid epoxy coatings you can find UV clear coats, clear and colored bases, fast curing epoxies and low viscosity epoxies that form extra hard surfaces apt for industrial purposes.

Whereas water-based and solvent-based epoxies both require that other liquids evaporate during the curing process, 100% solid epoxies do not. They cure as a result of chemical catalyzation. Another advantage of 100% solid epoxies is that they do not include any volatile compounds and are environmentally safe.

100% solid epoxy should only be applied by someone with plenty of experience coating a floor. It’s thicker consistency makes it harder to apply which is further complicated by the fact that it needs to be applied quickly—once it is exposed to air this high-grade epoxy floor coating solidifies in a maximum of 40 minutes.

Seeing as how 100% solid epoxy is quite costly, you don’t want any of it to end up drying in the pot before you’re able to use it on your garage floor.

Water Based Epoxies

Water based epoxies contain between 40% and 50% epoxy. They tend to be thinner and far easier to apply for first timers, but they offer less durability than solvent based epoxy coatings. Nonetheless, a water-based epoxy is a good choice for protecting new flooring, and one gallon typically costs between $30 and $50 USD.

Solvent Based Epoxies

Epoxy floor coating that contains between 40% and 60% solvents as a <i>carrier agent</i> are thicker than epoxies that use water for this same purpose. Since they are thicker, solvent based epoxies do not cover the same amount of surface area per gallon that water based epoxies do.

As a result of the thicker consistency, you have to use more of a solvent based epoxy to cover the same floor than you would if you were using a water-based epoxy floor coating. Solvent-based epoxies are also far more expensive, and the price per gallon can range from $50 to $150 USD.

Nonetheless, the resulting top layer you get from solvent based epoxy is much more durable than the top layer you get from  Oklahoma City Garage Door Pros  using water-based alternatives. It’s also a far better option if you are on a budget, but you have a rough and worn floor that you want to protect.

Top 10 Garage Door FAQs

I have been watching my neighbor pack his car outside his garage. Definitely, that is a weird thing. But most of us do this at the expense of securing other things that we presumably think are more important. Well, for whatever the purpose your garage plays to you, whether a workshop or a store, your garage door should be prioritized. without a properly installed and secured garage door, you might end up incurring huge losses.

Below are top 10 most important things you need to know regarding your garage door.

1. The R-value. Is it important?

The R-value of a garage door or any material dictates if it offers a better insulation than the other. you might not find it very necessary to insulate your garage door until you get to spend some time more than normal in your garage. This mostly goes to those who use their garage as their workshop.

For most of us, our garages have a connection to the main house, either a room above or directly beside it. This connection plays a crucial role in influencing the garage temperatures and thus will need a well-insulated garage door. Garages that are not attached from the main house can have the doors with a relatively low R-value or none at all.

So, before purchasing a garage door, it’s very imperative that you check its R-value. Higher R-values relates to better insulator properties.

2.The headroom, backroom and side room.

The space in the garage that is in between the ceiling and the top of the garage door is referred to as the headroom. Backroom is the total front-back length of the garage while the side room is the distance in between the garage’s side walls and its door.

Before purchasing and installing a door for your garage, its paramount to learn this dimensions as their play a crucial role in determining a proper operating garage.

3.Removal of the torsion springs in case of a replacement.

Removal of torsion springs in your garage door during a replacement may sound simple and easy. But did you know that the tension in the springs are usually under great pressure that can cause a powerful release enough to injure or even kill you!

A trained professional is highly recommended for this work. Take caution!

4.The number of cycles on the torsion springs.

The number of cycles on the torsion springs are mathematically and skillful determined. Determine the approximate number of times that your garage door goes up and down on a daily basis and multiply that number by 250 and then by the average life of the garage door which is 10 years.

The number of torsion cycles is limited to 25000,50000,75000 and 100000. You have to make your choice based on them.

5. Painting my garage door.

Questions have been raised on whether it’s possible to paint a steel garage door. Yes! by using quality latex paint, it extends the life of the door. Avoid using oil based paint as it will eventually peel off.

Wooden garage doors, fiberglass also looks great when painted. The best part of it is that you have the chance to choose the color that best matches with the rest of the house.

6.Unbalanced garage doors.

People keep on asking; how do I know that my garage door is unbalanced? Well, it’s very simple. A normal garage door can be lifted up with one hand however big it may appear.

The design of garage door systems is to take off the weight in ordinary doors. If you find it hard to lift your garage door, it is unbalanced and you might need a professional to fix it for you.

7. What about aluminum garage doors?

Aluminum is light in weight. Giving it even a greater advantage because aluminum garage door will be easier to lift. Moreover, aluminum is recyclable and therefore when the door wears out, it does not mean total loss. Through this, the environment is also conserved.

8. A high-wing rating garage door.

Some areas experience extremely high velocity winds. This winds can eventually blow off garage door hinges which might cause great losses especially if this happens when you are not around.

Due to this, special designed garage doors that are made of steel and other heavy hardware materials have been formulated. such doors are able to withstand extreme high winds of up to 170mph.

9. I have installed my garage door. what’s next?

You might not find it necessary to familiarize yourself and learn how the garage system operates until that moment you are already late for work and you are stuck in your garage without any idea what to do.

Learning the guidelines of the garage door system will not only save you time but effort too.

Step by step, the garage door manual outlines the opening procedure-for garage door opener, general operation, maintenance and any other requirement that the door needs for its best possible performance.

Garage door safety has also become an emerging issue in the past few years. but with the improved technology, this has been dealt with. You only need to follow few guidelines and you are at less or no risk to injure yourself.

10. Choosing a garage opener.

With the improved technology, the market provides a wide range of garage door openers, most of which are good. The most common are the liftmaster, Marantec and the Genie garage door openers.

Different garage openers have different properties, sizes and opening, it’s a matter of individual choice as they are all designed to perform the same function.

In conclusion.

When it comes to choosing your garage door, you have it all. You chose the size, the material- steel, aluminum, glass or even wooden. You chose the color of paint that best suits you and the opener of your choice.

Wayne Dalton, Clopay and Genie garage doors are among the most popular manufacturers that you can consider when purchasing one.